iFlight Nazgul5 Evoque F5 F5D DeadCat HD 4S / 6S 5 Inch FPV Racing Drone L BNF BLITZ Mini F7 FC 55A ESC CADDX Nebula Pro Vista

详情

Note:

- Gopro camera and battery are not included.

GP S Version， Click Here

Changelog :

August 2021: The color of 915 antenna mount changed from green to black, change the foam inner packaging to blister material.

August 2021: Before two antennas changed to one.

October 2021: Before SucceX-E mini F7 Stack(F7+45AESC) changed to BLITZ MINI (F7 +BLITZ E55 4-in-1 ESC)

November 2021: TPU color is random, you may receive yellow, pink, blue, green, or blackish green.

June 20th, 2022: Change into CADDX Nebula Pro Vista Digital System

PRODUCT DE SCRIP TION

The Secret Of Ultimate Performance Is Passion

That was the slogan for our newest approach to creating this piece of art! Fully protected electronics, fully illuminated, coupled with all the latest and greatest electronics we can offer. Months of engineering went into this BNF and all the lessons learmed before, making sure that beginners, as well as experienced pilots, would fully enjoy using the new Nazgul Evoque from the first second they use it.

Lightweight Side Panels - Keep Your Rig Clean

Ever felt like a lawnmower cutting through the grass in your early days, props cutting and throwing wet grass all over and inside your flight stack? Wei.. These days are over! The new side panels will not only protect from wetness but also protect the internals from any strikes hitting off little components from your flight controller. Secured Integrated XT60 Battery Plug - As Safe, It Can Be

Dangling battery plugs will ALWAYs find a way in your props, there's always that one time you forgot to secure it properly and almost cut off the cable while flying. There was only one way to get rid of that and we think we might have found a solution. The integrated XT60 connector on the back lets you securely plug in your battery leading all cables away from your props.

High-Performance Electronics - F7 55A Power Stack

Our BLI TZ Mini F7 Flight Controller with modern USB type-C plug, 16MB Black Box, and 5 UARTs for whatever equipment you might possibly wanna use. Power from the gods with our new BLI TZ Mini E55 55A ESC packed with better heatdissipating Mosfets and a whole bunch of SMD capacitors to filter out possible motor noise, besides the pre-soldered directly installed

Capacitor right next to your battery leads.

XING2 Performance Motors - The Best Motors Just Got Better

7075 aluminum bell, 5mm titanium alloy shaft, NSK durable bearings, Center slotted magnets for better response, and lower air gaps for a higher magnetic flux with increased performance and efficiency. Not to mention the typical XING damping ring between the bell and bearing to increase durability and smoothen out your flights. Illumination - Let It Be Green

360-degree illumination for day and night. Maybe the prettiest BNF out there but also a practical one. The bottom light indicates battery voltage, a quick check gives you a hint of the voltage stillremaining Never lift off with an empty battery again. nstalled LED wires in the side panels and the bottom of the arms are also illuminated and gives you some style at the next night's race.

Specifications:

Brand: iFlight

Item Name: Nazgul5 Evoque F5D HD 4S / 6 FPV Racing Drone

Total Dimensions: 136*190mm (body dimension)

Bottom to top distance: 28mm

Arm Thickness: 6mm

Bottom plate thickness: 3mm

Top plate thickness: 3mm

Upper(middle) plate thickness: 3mm

XiNG2 2207 motors (4S/6S)

Nazgul F5 propellers

Weight: 412g (without battery and GoPro mount)

F C // BLI TZ Mini F7 Flight Controller ( Link)

MCU: STM32 F722

Gyro: BMI270

Barometer: DPS310

OSD Chip: AT7456

Flash: 16MB (Blackbox flash)

UARTS: 6

Motor outputs: 4x (SH1.0 connector)

I2C serial: SDA/ SLA pads

Smartaudio / IRC Tramp VTX protocol supported

LED controller: Yes

Beeper pad: Yes

Firmware target: IFRC-IFLIGHT _ BLITZ _ F722

Mount pattern: 20x20 mm / 4mm PCB hole diameter, silicon grommets for M3 screws

Dimensions: 30.5x27 mm

Weight: 5g

E SC // BLITZ Mini E55 ESC （ Link）

Supports 2-6S lipo input

MCU: G071

Constant: 55 Amps

Burst: 60 Amps

Current sensor: Yes

BEC: No

Current rate: 100

Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.

Firmware: BL Heli 32

Target: IFLIGHT _ BLITZ _ G1

Dimension: 35*42mm

Mounting Holes: 20*20mm/Φ4mm

Weight: 11.3g

Package included :

1 x Nazgul5 Evoque F5 HD FPV Racing Drone (Deadcat)

4 x Nazgul F5 Prop

2 sets of Battery Pads

4 x Battery straps

1 x Screws bag